Product Details
Industrial Circulating Fluidized Bed Boiler Exhaust Fan is mainly used for boiler ventilation and ventilation, and is suitable for ventilation and ventilation systems of steam boilers below 670t/h in thermal power plants. A dust removal device must be installed before the induced draft fan to reduce the dust content of the boiler. The flue gas enters the fan as much as possible. According to the general use of the power plant, the dust removal efficiency is not less than 85%.
Feature:
1. Industrial Circulating Fluidized Bed Boiler Exhaust Fan can output higher exhaust pressure and can work under high temperature conditions, suitable for any industrial conditions that need to transport high pressure and high temperature gas.
2. The damper can flexibly adjust the air volume and pressure when the fan is running. The pressure and air volume of the fan can also be adjusted by matching the frequency conversion motor to change the fan speed.
3. In the case of using the system base, it is easy to install without professional guidance.
4. Regarding the material of the impeller and main shaft, we will choose high-strength carbon steel, low-alloy steel, high-temperature-resistant alloy steel, and high-temperature-resistant high-strength alloy steel according to different medium temperatures and operating speeds to ensure that the impeller and main shaft remain reliable at high temperatures Strength of.
5. When using liquid lubricating oil, there is no need to open the bearing seat when changing or adding lubricating oil. The quality and inventory of lubricating oil can be easily observed through the observation window on the bearing housing.
6. The bearing seat reserves the installation position of temperature and vibration sensor, which is convenient to install the fan operation monitoring device.
7. The bearing seat adopts labyrinth mechanical seal, unique internal anti-overflow design, top ventilation hole design, and the joint is coated with sealing grease to completely prevent oil leakage of the bearing seat.
8. When the airflow resistance increases, the motor load can be automatically reduced to prevent the motor from being damaged.
9. Customized design according to customer performance requirements, optimized by CFD technology, energy consumption is lower than similar fans.
10. Made of high-quality carbon steel, or stainless steel and other metal materials according to customer requirements.
http://www.industrialfanchina.com/
Company Profile
